PRAZIO ANTI-NEWTON SPRAY

Instructions

PRAZIO Anti Newton Spray is a superior mounting product, which when used as directed eliminates Newton Rings and reduces mounting and cleaning time.

1. Place tape on top and bottom edge of transparency.

2. Hold transparency at a distance of 15 to 20 inches from the spray can and apply a light dusting directly onto the transparency (do not soak the transparency). Application at a lesser distance, will result in a wet application and you will not achieve the desired results. When used accordingly, little or no clean up is required for either the transparency or scanner drum.

3. Tape the top of the transparency to the scanner drum.

4. If using a Mounting Device with a Pressure Roller, position the pressure roller onto the scanner drum and rotate the drum slowly. This will apply even pressure on the transparency. If a mounting device with pressure rollers is not available, apply even pressure with your hand from the top of the transparency downward.

5. PRAZIO Anti Newton Spray can easily be removed from the transparency with Prazio Film Cleaner using a PRAZIO Scanner or Ultra Wipe.

6. Should your drum require cleaning, we recommend using our PRAZIO Drum Cleaner with a PRAZIO Scanner or Ultra Wipe and finally PRAZIO Anti Static Spray.

PLEASE REMEMBER OUR PRAZIO DRUM CLEANER & PRAZIO ANTI STATIC SPRAY ARE NOT FOR USE ON TRANSPARENCIES OR FILM